Creality CR20 Pro User Manual

Preheat
Method 1
Feeding
Method 2
Press and hold the extruder lever then insert the 1.75mm
filament through the small hole of the extruder. Continue
feeding until you see filament come out the nozzle.
Tip：How to Replace the Filament？
1、Cutting filament near the Extruder and slowly feed new
filament until they are feed into the new filament.
2、Preheating the nozzle and withdraw the filament quickly
and feed the new filament.
06/
Loading Filament

Creality CR20 Pro Specifications

General

Brand	Creality
Model	CR20 Pro
Category	3D Printers
Language	English