Creality Ender-5 Plus Guide Book

Manual
Cooling
Automatic
Leveling
Refuel
Disable motor
Printer info
Moving
Language
Choose to Print
Set temperature of Nozzle
Current temperature of Nozzle
Set temperature of the Hot Bed
Current temperature of the Hot Bed
Screen Information ：
screen information
Main Menu
Sub Menu
Explanation
SD card
Selected file
Stop
Pause / Continue
Adjust
Print speed
Nozzle temp
Hot-bed temp
Z offset
fan
fan(off\on)
Temp
Automatic
PLA\ABS（185°\220°）
Manual
Nozzle preheat
Hot-bed preheat
Cooling
yes\no
Fan
(off\on)
setting
Leveling
Z-axis：Z home，+0.1mm,-0.1mm
AUX
leveling
Please click numbers to
assist leveling（①~⑤）
Auto
leveling
Auto leveling, please
wait...
Check level（Measurement parameters）
Refuel
Withdraw
Feed
Moving
X-axis
Y-axis
Z-axis
Z home
Disable motor
yes\no
Language
English\Chinese
Printer info
Machine type、Firmware version、
Printing size、website
8

Creality Ender-5 Plus Specifications

General

Build Volume	350 x 350 x 400 mm
Layer Resolution	0.1 - 0.4 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	SD card, USB
Frame Material	Aluminum
Bed Temperature	up to 110°C
Nozzle Temperature	up to 260°C
File Format	STL, OBJ, AMF
Print Technology	FDM (Fused Deposition Modeling)
Machine Weight	18.2 kg
Supported Filaments	PLA, ABS, TPU
Touch Screen	Yes
Input Voltage	AC 100-240V
Motherboard	V2.2
Bed Leveling	Automatic Bed Leveling (BL Touch)