Method 1
Method 2
Loading Filament ：
1. Preheat
2. Feeding
Tip: How to replace the Filament？
1、Cutting filament near the Extruder and slowly feed
new filament until they are fed into the new filament.
2、Preheating the nozzle and withdraw the filament
quickly and feed the new filament.
Press and hold the extruder lever and insert the
1.75mm filament through the filament detector and through
the extruder motor. Continue feeding until you see filament
extrude from the nozzle.
9
To Next Page
Loading...
