Creality Falcon2 - Additional Safety Instructions; Operational Safety Rules

1. Do not place this product near flammable and explosive materials, volatile solvents or heat sources. Please place
this product in a ventilated, cool and dust-free environment.
2. Do not use other power cords than the one provided in the package during the installation.
3. Regularly clean the body and laser module with an anti-static brush and a dry cloth when the machine is powered
off.
4. Please connect the silicone tube on the laser module no matter using an air assist or not. Otherwise, there will be
a risk of lens contamination.
5. The working temperature of laser module is 5°C-35°C. Avoid using this product in a humid environment, and do
not use it in thunderstorm weather.
6. If the product isn’t used for a long time, please turn off the product and disconnect the power cord.
7. When the product is connected to the power supply, please do not touch the electronic areas with your hands or
other tools. It is forbidden to plug and unplug the laser module cable when the machine is powered on.
8. When the product is running, please do not touch any part of the moving system and laser module.
9. Please place a flat object that the laser cannot penetrate under the processed material, such as aluminum alloy.
10. During the laser engraving, please wear goggles to avoid vision damage caused by looking directly at the laser
spot.
11. Smoke or smell may be produced during laser engraving and cutting. It is recommended to operate in a
well-ventilated environment.
12. Children under the age of 10 are strictly prohibited from using this product without adult supervision to avoid
injury.
13. Prepare fire extinguishers for backup. Regularly maintain and inspect the fire extinguishers.
14. It is forbidden to leave it unattended while the machine is working.
15. Users should abide by the laws and regulations of the corresponding country and region where the equipment is
located (where it is used), practise professional ethics, and pay attention to safety obligations. It is strictly forbidden to
use our products or equipment for any illegal purposes. If there is any violation, we will not be responsible for the
relevant legal responsibilities.
04