Creality K1 - Initial Printer Power On; Network and Time Zone Configuration; Creality Cloud Binding and Self-Inspection

13
6. Ensure the cleanliness of the blue cube in the diagram, then click "OK."
Power On
Welcome to Creality 3D Printer.
Please keep the blue cube in the diagram clear of debris
and lick “Ok”.
1. Network Settings
2. Time Zone Settings
3. Creality Cloud Binding
4. Self Inspection
Welcome to the self-check process
1. Please place the printing platform
2. The self-check process is expected to
take around 11 minutes.
Please scan the code to connect your device to the Creality
Cloud
Please set up your network
Time Zone Settings
Creality Cloud Binding
Self-inspection