Need help?Do you have a question about the Creality K1 and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Hot End Temperature | 300°C |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Display | 4.3-inch Touchscreen |
| Power Supply | 350W |
| Machine Dimensions | 355 x 355 x 480 mm |
| Printing Speed | 600 mm/s |
| Connectivity | Wi-Fi, USB |
| Max Bed Temperature | 100°C |
| Chamber Temperature | Not actively heated |
Comprehensive guidelines for safe operation, optimal placement, and effective material usage.
Guides on connecting the touch screen and essential power supply connection precautions.
Steps for setting up network connectivity and selecting the correct time zone on the printer.
Instructions for linking to Creality Cloud and initiating the printer's automated self-check.
Step-by-step instructions for preparing and initiating a 3D print using a USB flash drive.
Guide to installing Creality Print software and selecting the correct printer for LAN printing.
Procedures for regular machine cleaning and essential hot end maintenance to prevent blockages.
Guidance on nozzle replacement, printing platform care, and lubricating motion mechanism parts.
To Next Page