Creality K1 User Manual

14
Important Notice:
As a friendly reminder, if the cumulative printing time of the device surpasses 300 hours
or if you've made changes like replacing the printing platform or nozzles, there is a
possibility that the distance between the platform and nozzles could alter. This might
lead to inadequate adhesion of the first layer of your model, ultimately resulting in
printing failures. To circumvent this issue, we strongly recommend performing regular
calibration of the printing platform.
Please be aware that the current interface serves as a reference point. Given the
ongoing enhancements in functionality, it's advisable to refer to the latest firmware UI
available on our official website for the most up-to-date information.
6. Self Test Completed
5. Self Testing
Self-inspection
You have completed all processes!
Now you can print!

Creality K1 Specifications

General

Build Volume	220 x 220 x 250 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Max Hot End Temperature	300°C
Supported Filaments	PLA, ABS, PETG, TPU
Display	4.3-inch Touchscreen
Power Supply	350W
Machine Dimensions	355 x 355 x 480 mm
Printing Speed	600 mm/s
Connectivity	Wi-Fi, USB
Max Bed Temperature	100°C
Chamber Temperature	Not actively heated