Creality K1 User Manual

36
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant
provisions of EU directives.
WEEE
This product must not be disposed of as normal household waste in accordance with
the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a public
collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for further
details. Improper disposal of this type of waste may result in fines in accordance with
national regulations.

Creality K1 Specifications

General

Build Volume	220 x 220 x 250 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Max Hot End Temperature	300°C
Supported Filaments	PLA, ABS, PETG, TPU
Display	4.3-inch Touchscreen
Power Supply	350W
Machine Dimensions	355 x 355 x 480 mm
Printing Speed	600 mm/s
Connectivity	Wi-Fi, USB
Max Bed Temperature	100°C
Chamber Temperature	Not actively heated