34
Error Code Descriptions
Motor drive exception: An abnormality has been detected in the motor drive
system.
Internal errors: The system has encountered unexpected internal errors.
Communication failure: There is a failure in communication between components
or systems.
Not heated as expected: The heating element did not reach the expected
temperature.
Hotbed temperature anomaly: An irregularity has been identified in the hotbed
temperature.
Extruder failure: The extruder system is experiencing a malfunction.
Exception for printing file coordinates: unexpected coordinates were detected in
the printing file.
Print quality problems detected: Printing has been suspended due to identified
print quality issues.
Unknown printing error: An unclassified error has been detected during the
printing process.
Temperature cavity anomaly: The temperature within a cavity is deviating from the
expected range.
Vibration vein optimization sensor failure: A sensor related to vibration vein
optimization is malfunctioning.
Fan anomaly: Abnormal operation or malfunction has been detected in a cooling
fan.
Network anomaly: An issue has arisen in the network connectivity or
communication.
Detected printing quality problems: Irregularities in printing quality have been
identified.
z-Touch exception detected: An exception in the z-Touch system has been
identified.
File copy exception detected: There was an anomaly during the copying of files.
Unknown exception: An unclassified exception or error has occurred.
To Next Page
Loading...
Need help?
General
