Creality K1 User Manual

33
3. Should the initial model layer not adhere properly, consider evenly applying a layer
of glue stick onto the platform's surface. This practice will help enhance adhesion
and improve the overall print quality.
Cleaning the Debris Inside the Chassis
Note: In light of the printing platform's tendency to wear over time, we advise a periodic
replacement to maintain optimal adhesion of the model's first layer.

Creality K1 Specifications

General

Build Volume	220 x 220 x 250 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Max Hot End Temperature	300°C
Supported Filaments	PLA, ABS, PETG, TPU
Display	4.3-inch Touchscreen
Power Supply	350W
Machine Dimensions	355 x 355 x 480 mm
Printing Speed	600 mm/s
Connectivity	Wi-Fi, USB
Max Bed Temperature	100°C
Chamber Temperature	Not actively heated