Creality K1C

4. First Printing
01
14
② Choose a language and region ③ Choose a Printer
Creality Print
⑤ Open the model and click on “Slice”
Note: The current interface is for reference only. Due to the continuous upgrading of functions,
it shall be subject to the latest software UI published on the official website.
④ Import model files
4.2 LAN Printing
① Download at
(www.crealitycloud.com)
or find the software
on a USB flash drive
and install it.
Tips: the computer
must be in the same
local area network
as the printer