Creality K1C User Manual

2. Unboxing
Note: The current interface is for reference only. Due to the continuousupgrading of functions,
it shall be subject to the latest firmware UI published on the official website.
09
Reminder: When the printing time of the device exceeds 300 hours, or ifthe printing platform or
nozzles have been replaced, the distance between the platform and nozzles may change that
caused the first layer of the model may not stick firmly, resulting in printing failure. Please
calibratethe platform regularly.
2.3 Power-on guide

Creality K1C Specifications

General

Nozzle Diameter	0.4 mm
Filament Diameter	1.75mm
Build Volume	220*220*250mm
Print Speed	600 mm/s
Max Hot End Temperature	300°C
Supported Filaments	PLA, PETG, TPU, PA, ABS, PC
Connectivity	USB, Wi-Fi
Printing Technology	FDM
Display	4.3-inch Touchscreen
Leveling Mode	Automatic