Creality K1C User Manual

2. Unboxing
Note: The current interface is for reference only. Due to the continuous
upgrading of functions, it shall be subject to the latest firmware UI published
on the official website.
01
08
⑩ Keep the blue cube in the figure clean of debris and then click“OK".
⑨ Select a language and click “Next", Remove three screws a, b and c according to position
indicated by the yellow arrow. click “OK" on the screen.
c
a
b

Creality K1C Specifications

General

Nozzle Diameter	0.4 mm
Filament Diameter	1.75mm
Build Volume	220*220*250mm
Print Speed	600 mm/s
Max Hot End Temperature	300°C
Supported Filaments	PLA, PETG, TPU, PA, ABS, PC
Connectivity	USB, Wi-Fi
Printing Technology	FDM
Display	4.3-inch Touchscreen
Leveling Mode	Automatic