Creality K1C User Manual

Note: The current interface is for reference only. Due to the continuous
upgrading of functions, it shall be subject to the latest firmware UI
published on the official website.
NOTE: The nozzle temperature must be set
according to the filament properties.
5. Functional Specification
01
18
5.1 Extrude、Filament Retreat
Extrude
Filament Retreat

Creality K1C Specifications

General

Nozzle Diameter	0.4 mm
Filament Diameter	1.75mm
Build Volume	220*220*250mm
Print Speed	600 mm/s
Max Hot End Temperature	300°C
Supported Filaments	PLA, PETG, TPU, PA, ABS, PC
Connectivity	USB, Wi-Fi
Printing Technology	FDM
Display	4.3-inch Touchscreen
Leveling Mode	Automatic