Creality K1C

6. Tips and Routine Maintenance
01
23
X-axis optic axis 2
X-axis optic axis 1
6.2 Precautions for printing
Tips: please grease and lubricate the designated areas regularly (as shown in the picture).
(Users may buy the grease themselves for machine maintenance.）
6.2.1 Lubrication and maintenance
Y-axis optic axis 1
Z-axis optic axis 1
Screw rod 1
Z-axis optic axis 2
Screw rod 2
Y-axis optic axis 2
Screw rod 3
Z-axis optic axis 3