Creality K1C

6. Tips and Routine Maintenance
01
24
6.2.2 Use and maintenance of flexible platform
Features Features
PEI sticker
+
Spring steel plate
Spray with PEI
+
Spring steel plate
If you want to buy the above flexible platform, you can enter the mall
https://vip.creality.com/en/goods-detail/2105 for purchase.
- Suitable for low-temperature hotbed printing, such as
printing at 45°C by PLA for energy efficiency
- Compatible with various filaments, including PLA/ABS/
TPU/PETG, and more
- Smooth bottom surface
- Flexible, easy to demold, and can be bent for demolding
- Surface A is not resistant to oil or hand sweat; it needs to be
cleaned or coated with adhesive before printing.
- PEI stickers are prone to be damaged; high nozzle temperatures
and forceful model removal can cause warping. Metal blades may
damage the PEI sticker layer
- When printing with engineering materials like ABS, adhesive is
required. It is recommended to use the attached rubber stick or
purchase specialized 3D printing adhesives like LALDC/maigoo.
Precautions for use
Precautions for use
- High temperature resistance, longer lifespan.
- Compatible with various filaments, including PLA/ABS/PETG/PLA-CF/PA-CF/ASA, and more
- The bottom surface has a textured finish
- Flexible, easy to demold, and can be bent for demolding
- Increase the hotbed temperature by 10°C during printing.
- When printing with engineering materials like ABS, adhesive is required. It is recommended to
use the attached rubber stick or purchase specialized 3D printing adhesives like LALDC/maigoo