Creality Spider - Secure Teflon Tube with Wire Clip; Connect Thermistor Wire to Motherboard

7.取下蓝色线夹，插入铁氟龙管，再次装上线夹固定；
7. Remove the blue wire clip, insert the Teflon tube, and install the wire clip again to fix it;
8.将热敏电阻线与主板端连接——如果热敏电阻线长不够，或者端子不匹配，可以利用原装的热敏电阻线或
者端子改装，如Ender-5系列机型；
8. Connect the thermistor wire to the motherboard end - if the thermistor wire is not long
enough or the terminals do not match, you can use the original thermistor wire or terminal
to modify, such as Ender-5 series models;