Creality Spider - Install Heater and Thermistor to New Hotend; Mount Hotend to 3 D Printer; Install Fan Cover and Adapter

4.安装加热管及热敏电阻到Spider高温高流量喷头上（需要用M3螺丝固定），热敏电阻为Spider 高温高流
量喷头套件附带；
4. Install the heating tube and thermistor to the Spider high temperature and high flow
nozzle (it needs to be fixed with M3 screws), the thermistor is attached to the Spider high
temperature and high flow nozzle kit;
5.取下喷头套件顶部转接头，用螺丝固定Spider高温高流量喷头到3D打印机上（根据3D打印机具体结构方
式，可用螺丝固定，也可用转接头固定）；
5. Remove the top adapter of the nozzle kit, and fix the Spider high temperature and high
flow nozzle to the 3D printer with screws (according to the specific structure of the 3D
printer, it can be fixed with screws or with adapters);
6.安装风扇罩（风扇罩卡到喷头上），并将转接头安装到风扇罩顶部；
6. Install the fan cover (the fan cover is clipped to the nozzle), and install the adapter to the
top of the fan cover;