1.3 Enter printing interface, the printer starts to print, and the screen
will display printing information such as estimated time.
1.4 Parameters can be adjusted during the printing process, the
specific parameters are shown in the figure.
1.5 During the printing process, you can choose to Pause/Stop printing.
It can resume after pause, but it will exit the printing interface and go
back to Home page if you stop printing.
Note: Parameter adjustment can only be performed after the printer starts printing, and
cannot be adjusted during the preparation process (such as heating).
1.6 If you need to terminate the print process, you can click
09
To Next Page
Loading...
