Creality TL4800 User Manual

6. Daily use
1. Print
1.1 Enter the Home page and click "Print".
1.2 Select the gcode file saved locally or in the USB drive, click
on the to print the file.
3. Functional self-check
After the printer firmware is flashed, the Creality Sonic Pad will automatically
restart the printer. After restarting, it will enter the function self-test and follow the
on-screen instructions. After the self-test is completed, click Start your experience,
the screen will save the relevant user configuration, and the system will be reload-
ed. After entering the Home page, you can start using this product.
08

Creality TL4800 Specifications

General

Brand	Creality
Model	TL4800
Category	3D Printers
Language	English