v
Before You Begin
This section provides information you should know before using this
manual. It is organized as follows:
❑ Recording Model and Serial Numbers
Recording Model and Serial Numbers
Your modem card has a model number and a serial number. After you
have removed the card from its packaging, write down its model and
serial numbers at the back of this manual for future reference.
Note: Some supplied software run only under Windows 95/98.
For your modem to work, check that it is connected to an analog
telephone line, also called a POTS (Plain Old Telephone Service) line.
Using This Guide
This guide helps you install and configure your modem. It is organized
as follows:
Chapter 1, “Getting to Know Your Modem”
Contains information about the various hardware components on your
modem. If you are new to modems, it is strongly recommended that
you read this chapter before setting up your card.
Chapter 2, “Setting Up the Modem”
Guides you through the process of installing the card in your system.
Chapter 3, “Installing Software in Windows 95/98”
Shows you how to install your software. It also shows you how to run
the test program to ensure the modem card has been installed
correctly.
Chapter 4, “Connectors and Settings”
Provides connectors and jumpers information.
To Next Page
Loading...
