(Movie > Music > Night > Neutral > SuperWide)
17. Bass – / + Button: Press once to adjust subwoofer’s bass level
18. Speaker Button: Press once to switch to speaker-out
19. SXFI Button: Press once to turn on / off Super X-Fi Headphone
Holography when in Headphone-out3 mode
20. HP Button: Press once to switch to Headphone-out mode
21. Custom (C1-C6) Buttons: Custom buttons are customizable using the
Creative app
1. Does not control volume setting of devices connected to SXFI-out. Please adjust device’s volume directly on the
connected SXFI-enabled device
2. When in Device Settings’ menu,
Press the Play / Pause button once to enter the menu or apply selected settings
Press the Volume – / Next Track button to go to the next menu selection
Press the Volume + / Previous Track button return to the previous menu selection
Press the Menu or Back button to exit device’s Settings menu
3. For SXFI-enabled devices connected via rear SXFI-out, please use the Super X-Fi button located on the device
to enable / disable Super X-Fi Headphone Holography and the Volume Control Dial / Buttons to control
playback volume. Super X-Fi Headphone Holography is available
via Headphone-out only. When switched to Speaker Mode, Super X-Fi Headphone Holography, as well as the
corresponding LED(s) will be turned off
Overview – Sound Modes
To Next Page
Loading...
