Crest Audio CR4 - Watch Mode Settings: Auto Active and Log Start; Auto Active and Log Start Settings

Page 16
1.3.3 Watch Mode Settings
Setup range:
12H / 24H
Description: Auto Active Mode at depth
(AUTO MODE)
To Access: Under Watch Mode, press the
UP Button once, and press UP Button /
DOWN Button to locate the cursor and
then press MODE Button once to select
the desired settings. The values at the
bottom of the screen will blink.
Auto Active Mode will be the automatic
default mode dive computer access
immediately after it senses a depth of at
least 1.0 m (3.3 ft.).
Default: Scuba (Scuba Mode)
Setup range:
Scuba Mode, Freediving Mode, or
Gauge Mode
For Log Start Depth please go to Log Start
Settings.
Description: Log Start at Depth Setting
(LOG START)
To Access: Under Watch Mode, press the
UP Button once, and press UP Button /
DOWN Button to locate the cursor and
then press MODE Button once to select
the desired settings. The values at the
bottom of the screen will blink.
Dive Log will start recorded
automatically after it senses a depth of
at least 1.0 (3.3 ft.)
Default: 1.0 m (3.3 ft.)
Setup range:
1.0 m (3.3 ft.), 1.5 m (4.9 ft.), 2.0 m (6.5
ft.), 2.5 m (8.2 ft.), 3.0 m (9.48 ft.)
Note:
This setting will automatically apply to
Scuba Mode, Gauge Mode and
Freediving Mode.