53
Viewing Signal Information
Information about input and output signals can be viewed on the LCD. Depending on the
input selected, information such as the name of the input, the detected resolution, the
detected video type, the detected frame rate, the detected aspect ratio, the HDCP
state, and the deep color setting can be viewed.
View Input Signal Information
To view information about an input signal:
1. Press the INFO push button. The INFO LED lights.
2. Press the desired IN button to view information about the input signal.
The IN LED lights.
3. Turn the selection knob to view the available information.
View Output Signal Information
To view information about an output signal:
1. Press the INFO push button. The INFO LED lights.
2. Press the desired OUT button to view information about the output signal.
The OUT LED lights.
3. Turn the selection knob to view the available information.
To Next Page
Loading...
