Crestron DM-RMC-4K-SCALER-C - HDCP 2.2 Compliance

12
•
DM-RMC-4K-SCALER-C/-DSP: 4K DigitalMedia 8G+ Receivers Supplemental Guide – DOC. 7728A
When the third-party HDBaseT transmitter device is added to slot 5, the HDBaseT
Transmitter symbol adds a COM port to the device and enables two-way serial
communication.
Addition of HDBaseT Transmitter to Slot 5 and COM Port in Slot 1
HDCP 2.2 Compliance
The DM-RMC-4K-SCALER-C is compliant with HDCP 2.2. HDCP 2.2, commonly referred
to as HDCP 2, is the next generation of HDCP (High-Definition Content Protection). Note the
following about HDCP 2:
• Compared to HDCP 1, HDCP 2 brings a higher level of cryptographic protection to
HDMI
®
technology.
• HDCP 2 is
not
HDMI 2. It is possible to have a system built on HDCP 1 and
HDMI 2, HDCP 2 and HDMI 1, or HDCP 2 and HDMI 2.
• Although not all 4K content requires HDCP 2, most 4K consumer video content
does require HDCP 2.
• Any product that supports HDCP 2 also supports HDCP 1.
• HDCP matters only when the source demands HDCP. If the source demands
HDCP 2, then every device in the signal path must support HDCP 2.
• There are no issues related to HDCP 2 and cabling—all cables are “compatible.”