Crestron DMPS-100/200/300-C/300-C-AEC DigitalMedia Presentation System
Operations Guide – DOC. 7219D DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC • 53
“Select Input 1 Type” Menu
Select Input 1 Type
HDMI j
5. Press ENTER to save the input type and return to the “Sel. Input Type”
menu or press MENU to cancel the operation and return to the “Sel. Input
Type” menu.
6. After all inputs have been set up, press MENU to return to the “Video
NOTE: For inputs 3, 4, and 5, there is no audio output if the audio input type is set
to HDMI, and the video input type is set to something other than HDMI.
Name Video Outputs
The DMPS-100/200/300-C ships with default names assigned to each of the outputs.
To change the output names:
1. Access the “Video Setup” menu as described on page 51.
2. Press the k or j buttons until Output Names is displayed on the LCD and
Press ENTER to display the “Sel. Output to Name” menu.
“Sel. Output to Name” Menu
Sel. Output To Name
1:HDMI 1 j
3. Press the k or j buttons until the output to be named is displayed on the
LCD and press ENTER. The cursor is placed after the last character in the
output name.
Output Name Change Screen
4. Turn the VOLUME control clockwise or counterclockwise (or press the k
or j buttons) to select a new letter (uppercase or lowercase) or number.
Move the cursor by pressing the buttons under the < or > symbols. Each
output name can be up to 14 characters in length. To delete a character,
position the cursor under the character to be deleted and press the button
under Del. To insert a space, position the cursor where the space is to be
inserted and press the button under Ins.
5. Press ENTER to save the new name and return to the “Sel. Output to
Name” menu or press MENU to cancel the operation and return to the “Sel.
Output to Name” menu.
6. After all outputs have been named, press MENU to return to the “Video
To Next Page
Loading...
Need help?
General
