Need help?Do you have a question about the Crestron DMPS-100 and is the answer not in the manual?
Manufacturer compliance statement for Federal Communications Commission regulations.
Manufacturer compliance statement for Industry Canada regulations.
Details the various capabilities and functions of the DigitalMedia Presentation Systems.
Guidance on establishing network connections using Crestron and CAT5e/DM 8G cabling.
Technical details on Category 5 wiring for Ethernet networks.
Instructions for proper airflow and thermal management of the unit.
Procedures and safety guidelines for installing the unit in a rack.
Steps for connecting and establishing communication via USB.
Overview of communication methods for system setup and maintenance.
Procedures for network communication setup for system interaction.
Information on obtaining and upgrading device firmware for new features.
Guide to accessing the primary system configuration menu for initial setup.
Configuration options for audio inputs, outputs, and signal processing.
Setting the signal type (Auto, HDMI, Analog, S/PDIF) for various audio/video inputs.
Configuring the main audio output's source mix, bass, treble, and delay settings.
Settings for managing the source mix, bass, treble, delay, and volume of auxiliary outputs.
Adjusting input compensation levels for analog audio inputs on the front panel.
Settings for microphone input gating, compression, limiter, and gain adjustments.
Configuring video input naming, signal types, and output naming conventions.
Navigating to the network settings menu for configuration.
Manually configuring the device's IP address for network connectivity.
Configuring the subnet mask to define the network segment.
Configuring the default router's IP address for network traffic routing.
Enabling or disabling DHCP for automatic IP address assignment.
Configuring WINS server for hostname resolution within the network.
Setting a unique hostname for the device for network identification.
Setting the domain name for hostname resolution.
Viewing the device's unique Media Access Control address.
Navigating to the control settings menu for front panel adjustments.
Adjust backlight, change password, and view system info.
Accessing details about the DMPS, including hardware and software status.
Accessing and reviewing the device's internal system message log.
Configuring the device's internal clock for accurate timekeeping.
Resetting device configurations to factory defaults for audio and other settings.
Enabling or disabling front panel controls to prevent unauthorized changes.
Table of common issues and their corrective actions for system operation.
Procedure for entering Monitor mode to reload firmware when normal loading fails.
Procedures for returning products for credit, exchange, or repair.
Details of the manufacturer's limited warranty coverage and terms.
To Next Page
General