Crestron DMPS-100 User Manual

DigitalMedia Presentation Systems Crestron DMPS-100/200/300-C/300-C-AEC
60 • DigitalMedia Presentation Systems: DMPS-100/200/300-C/300-C-AEC Operations Guide – DOC. 7219D
Operating System Information Screen
DMPS-300-C Cntrl Eng
<< >>
12. Press the buttons under the symbols << or >> to view the information that
cannot fit on the display.
13. Press the MENU button to return to the “Info” menu.
14. To return to the “Control Setup” menu, press MENU.
Review System Messages
The DMPS-100/200/300-C stores system messages in a message log. To review
system messages using the front panel:
1. Access the “Control Setup” menu as described on page 57.
2. Press the k or j buttons until Messages is displayed on the LCD and press
ENTER to display the viewing controls.
System Message Viewing Controls Screen
System log:
Btm Clear << >>
3. To scroll through messages in the log, press the k or j buttons.
4. To jump to the last message in the log, press the button under Btm.
5. To jump to the beginning of the log, press the button under Top (not
shown).
6. To view the contents of a message, press the buttons under the symbols <<
or >>.
7. To erase the contents of the log, press the button under Clear.
8. Press MENU to return to the “Control Setup” menu.
NOTE: The contents of the message log can also be read and saved using Crestron
Toolbox. For more information, refer to the Crestron Toolbox help file.
Set the Date and Time
Use the front panel to set the DMPS-100/200/300-C’s date and time.
1. Access the “Control Setup” menu as described on page 57.
2. Press the k or j buttons until Time/Date is displayed on the LCD and
press ENTER to display the date and time controls.
Date and Time Controls Screen
12/13/11 12:40:15PM
DATE TIME
3. To set the date, press the button under DATE. The date controls are
displayed.

Crestron DMPS-100 Specifications

General

Brand	Crestron
Model	DMPS-100
Category	Projector
Language	English