Supplemental Guide – DOC. 7844E CCS-UC-1: Crestron Mercury Tabletop Conference System • 13
Cloud Settings
The device can connect with the Crestron Cloud provisioning service. To allow a connection
to the Crestron Cloud provisioning service, set
Cloud Configuration Service Connection to
Enabled. To deny the connection, set Cloud Configuration Service Connection to
Disabled. For more information, refer to “Enterprise Deployment Options” on page 38.
Auto Update
DEVICE Screen - Auto Update
The device can automatically check for firmware updates and update the device as needed.
To allow auto updating, set
Auto Update to Enabled. To turn off auto updating, set Auto
Update to Disabled.
NOTE: To check for available updates, click Update Now.
To Next Page
Loading...
