Crestron Mercury CCS-UC-1 Do Guide

2 • CCS-UC-1: Crestron Mercury Tabletop Conference System Supplemental Guide – DOC. 7844E
Operating Environment
NOTE: If the CCS-UC-1 is powered with PoE+ (IEEE 820.3at), PoE+ switches that
utilize Link Layer Discovery Protocol (LLDP) must have LLDP enabled. Please
coordinate with the IT Administrator who manages network infrastructure at the
customer site to make sure the PoE+ ports have LLDP enabled. For more
information, refer to “
Troubleshooting” on page 65.
The CCS-UC-1’s requires the following to make the most of its capabilities.
• Crestron Fusion software
• SIP Server
• Microsoft Exchange Server
®
software
Accessories
The CCS-UC-1 offers a variety of accessories for a custom installation. Refer to the
following websites for specifications and other information.
Accessories for CCS-UC-1
PRODUCT PART NUMBER WEBSITE
Camera CCS-CAM-USB-F-100
http://www.crestron.com/products/model/CCS-
CAM-USB-F-100
IR Emitter Probe STIRP http://www.crestron.com/products/model/STIRP
Microphone Pod CCS-UCA-MIC
http://www.crestron.com/products/model/CCS-
UCA-MIC
Power Pack PW-2420RU
http://www.crestron.com/products/model/PW-
2420RU
Configuration
Requirements
Configuration requires a computer with web browser software. The computer must be
connected to the same network as the CCS-UC-1.
Connect to the Device
To connect to the device, follow this procedure:
1. On the device, tap .
2. Press and hold Help for approximately 10 seconds to display the System Info
screen.

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English