Crestron Mercury CCS-UC-1 Do Guide

Supplemental Guide – DOC. 7844E CCS-UC-1: Crestron Mercury Tabletop Conference System • 7
NETWORK
Click NETWORK to configure the device for operating in a network environment. The
screen displays controls for configuring the network settings and 802.1x authentication.
Network Setting
To configure the network settings follow this procedure:
NETWORK Screen - Network Setting
1. Enter a host name (15 characters or less) in the Host Name field and a domain
name (optional) in the
Domain Name field.
NOTE: Use a host name and domain name as an alternative to IP addressing
when connecting client computers to the device.
2. The CCS-UC-1 has two network adapters, Adapter 1 and Adapter 2. Adapter 1 is
the name assigned to the LAN port and
Adapter 2 is the name assigned to the
AUX port. The network adapters can be set to have the IP address, subnet mask,
default gateway, and DNS servers set manually, or obtain the settings from a DHCP
server. Choose one of the following options for each network adapter.
• Set DHCP Enabled to On to use a DHCP server to provide the IP address,
subnet mask, default gateway, and DNS server.

Crestron Mercury CCS-UC-1 Specifications

General

Brand	Crestron
Model	Mercury CCS-UC-1
Category	Conference System
Language	English