20 • CCS-UC-1: Crestron Mercury Tabletop Conference System Supplemental Guide – DOC. 7844E
Authentication Management
DEVICE Screen - Authentication Management
This section is used to set the password for the current user, and manage authorized users
and user groups.
Enable Authentication must be set to On.
• Current User
1. Click the Current User tab to set the current user’s password.
2. Click Change Current User Password to change the current user’s password.
3. Enter the new password in the Password field.
4. Confirm the new password in the Confirm Password field.
5. Click OK to set the new password or click Cancel to cancel.
• Users
Click the Users tab to manage authorized users. A list of authorized users is
displayed.
DEVICE Screen - Authentication Management: Users Tab
o Click to view details about a user.
o Click to update a user’s information.
o Click to delete the user from the list of authorized users.
To Next Page
Loading...
