Crestron Mercury CCS-UC-1 - Page 28

22 • CCS-UC-1: Crestron Mercury Tabletop Conference System Supplemental Guide – DOC. 7844E
o Click Create Group to add a group to the list of user groups. The Create
Group screen is displayed.
Create Group Screen
1. Enter the group name in the Name field.
2. Select the group’s access level from the Access Level drop-down list.
 Administrator grants full access to the system settings and device
functions.
 Connect grants access to the device functions.
 Operator grants read access to the system settings and full access to
the device functions
 Programmer grants access to program/project specific
settings/ReadOnly to the rest, read/write access to the file system, no
access to the setup project
 User grants access to the device functions
3. Click OK to save the group or click Cancel to cancel.
Zoom Room
DEVICE Screen - Zoom Room
This section is used to set the device to operate as either a Crestron Mercury device or a
Zoom room controller.
• When Zoom Room is set to Disabled, the Crestron Mercury device works as
described in this document.
• When Zoom Room is set to Enabled, the Crestron Mercury device works as a
Zoom room controller used to control a Zoom room conference system.
For more information on using the CCS-UC-1 as a Zoom room controller, refer to
www.crestron.com/mercury
.