Crestron SIMPL+ - Introduction; Software Requirements

Crestron SIMPL+
®
Software
Language Reference Guide - DOC. 5797G SIMPL+
®
z 1
Introduction
SIMPL+
®
is a language extension that enhances SIMPL Windows by using a
procedural “C-like” language to code elements of the program that were difficult, or
impossible, with SIMPL alone. This help system provides specific information about
the SIMPL+ language syntax, and can be used as a reference manual.
For a tutorial on SIMPL+ programming, consult the SIMPL+ Programming Guide
(Doc. 5789). The latest version of the guide can be obtained from the Downloads |
Product Manuals section of the Crestron website (www.crestron.com).
Software Requirements
SIMPL+ has several versions. Earlier versions of SIMPL+ do not contain features
and constructs found in later revisions. Each version of SIMPL+ requires a minimum
revisions of SIMPL Windows and Control System Update (UPZ or, for 2-Series
control systems, CUZ) files. The specifications are listed below.
Software Requirements
SIMPL+ VERSION MINIMUM SIMPL WINDOWS REQUIRED MINIMUM UPZ MINIMUM CUZ
Version 1.00 1.30.01 5.04.11 N/A
Version 2.00 1.40.02 5.10.00 N/A
Version 3.00 2.00 N/A 1.00