Crestron SIMPL+ - #DEFAULT_NONVOLATILE Directive

Crestron SIMPL+
®
Software
Language Reference Guide - DOC. 5797G SIMPL+
®
z 35
#DEFAULT_NONVOLATILE
Name:
#DEFAULT_NONVOLATILE
Syntax:
#DEFAULT_NONVOLATILE
Description:
Program variables retain their value if hardware power is lost. The compiler will
default all variables declared within the SIMPL+ module as nonvolatile. Individual
variables can use the Volatile keyword to override this default. See also
#DEFAULT_VOLATILE on page 36.
Example:
#DEFAULT_NONVOLATILE
Version:
SIMPL+ Version 3.00
Control System:
2-Series only