Crestron SIMPL+ - WriteSignedInteger Function

Crestron SIMPL+
®
Software
Language Reference Guide - DOC. 5797G SIMPL+
®
z 191
WriteSignedInteger
Name:
WriteSignedInteger
Syntax:
SIGNED_INTEGER WriteSignedInteger ( INTEGER
file_handle,
SIGNED_INTEGER si )
Description:
Writes a signed integer from a file starting at the current file position. Two bytes are
written, most significant first. Refer to the section entitled “Reading and Writing Data
to a File” on page 118 for a discussion of when to use this function and when to use
the related functions: FileWrite, WriteInteger, WriteString, WriteStructure,
WriteSignedInteger, WriteLongInteger, WriteLongSignedInteger,
WriteIntegerArray, WriteSignedIntegerArray, WriteLongIntegerArray,
WriteLongSignedIntegerArray, WriteStringArray.
Use ReadSignedInteger to read this.
Parameters:
FILE_HANDLE specifies the file handle of the previously opened file (from
FileOpen).
SI is the signed integer whose value is written.
Return Value:
Number of bytes written to the file. If the return value is negative, it is an error code.
NOTE: Input and Output variables of any kind are not allowed in the file reading and
writing functions, just internal variables.