Crestron SIMPL+ - Oem_Str_Out

Software Crestron SIMPL+
®
356 z SIMPL+
®
Language Reference Guide - DOC. 5797G
Example:
INTEGER I;
CHANGE _OEM_STR_IN
{
FOR(I=1 to len(_OEM_STR_IN))
IF(byte(_OEM_STR_IN, I) = 0x7F
_OEM_STR_OUT = “\x15”;
CLEARSTRING(_OEM_STR_IN);
}
In this example, whenever the input buffer changes, it is scanned for the character
with the hex value of 0x7F. Each time it is present, a 0x15 is transmitted. The buffer
is cleared at the end of the iteration.
Version:
SIMPL+ Version 2.00
_OEM_STR_OUT
Name:
_OEM_STR_OUT
Syntax:
Any expression where a BUFFER_OUTPUT is legal.
Description:
This variable is treated the same as BUFFER_OUTPUT and reflects data coming
from the CEN-OEM input buffer. The buffer is 255 bytes wide.
Example:
INTEGER I;
CHANGE _OEM_STR_OUT
{
FOR(I=1 to len(_OEM_STR_OUT))
IF(byte(_OEM_STR_OUT, I) = 0x7F
_OEM_STR_IN = “\x15”;
CLEARSTRING(_OEM_STR_OUT);
}
In this example, whenever the input buffer changes, it is scanned for the character
with the hex value of 0x7F. Each time it is present, a 0x15 is transmitted. The buffer
is cleared at the end of the iteration.
Version:
SIMPL+ Version 2.00