Crestron SIMPL+
®
Software
Language Reference Guide - DOC. 5797G SIMPL+
®
z 183
StartFileOperations
Name:
StartFileOperations
Syntax:
SIGNED_INTEGER StartFileOperations()
Description:
Signifies to the operating system that the current thread is starting its file operations.
Parameters:
None.
Return Value:
Returns 0 if successful and –1 if an error occurred.
Example:
(Refer to "File Functions Overview"on page 116)
IF ( StartFileOperations() < 0 )
PRINT ( “Error in starting file ops\n” );
// various file operations
IF ( EndFileOperations() < 0 )
PRINT ( “Error Occurred in ending file ops\n” );
Version:
SIMPL+ Version 3.00.02 or higher (Pro 2 only)
Control System:
2-Series Only
NOTE: StartFileOperations is required prior to any operation accessing a file.
EndFileOperations is required after finishing all file operations and prior to
terminating the thread of execution (e.g., one of the PUSH commands).
To Next Page
Loading...
