Crestron SIMPL+ - Return and Warranty Policies; Merchandise Returns; Repair Service; CRESTRON Limited Warranty; Trademark Information

Crestron SIMPL+
®
Software
Language Reference Guide - DOC. 5797G SIMPL+
®
z 353
_OEM_LONG_BREAK
Name:
_OEM_LONG_BREAK
Syntax:
_OEM_LONG_BREAK = <expression>;
or any expression that can use a variable as part of its contents.
Description:
When set to a non-zero value, causes the start of a break being transmitted on the port.
A break is continuous logic low being generated on the port. In order to stop break
generation, the variable should be set to 0. The variable may also be read back from
to determine its current status. It is treated the same as a DIGITAL_OUTPUT.
If break generation is in progress and data transmission on _OEM_STR_OUT will be
ignored.
Example:
PUSH _OEM_CTS
{
_OEM_LONG_BREAK = 1;
WAIT(100)
_OEM_LONG_BREAK=0;
}
In this example, the break is generated for 1-second when the CTS pin is driven high.
Version:
SIMPL+ Version 2.00
_OEM_MAX_STRING
Name:
_OEM_MAX_STRING
Syntax:
_OEM_MAX_STRING = <expression>;
or any expression that can use a variable as part of its contents.
Description:
Controls the maximum embedded packet size that is transmitted on the Ethernet port.
This variable is treated the same as ANALOG_OUTPUT. The default is 250 bytes
but it is recommended that this value not be changed for most applications.