Crestron SIMPL+ - FileGetDateNum Function

Software Crestron SIMPL+
®
128 z SIMPL+
®
Language Reference Guide - DOC. 5797G
FileGetDateNum
Name:
FileGetDateNum
Syntax:
SIGNED_INTEGER FileGetDateNum(FILEINFO Info);
Description:
Returns an integer corresponding to the day of the month of the file.
Parameters:
INFO – structure containing the information about a found file (refer to "FindFirst"
on page 149 for description).
Return Value:
The day of the month as an integer from 1 to 31.
Example:
(Refer to "File Functions Overview"on page 116)
INTEGER NumDateOfMonth;
FILE_INFO FileInfo;
INTEGER Found;
StartFileOperations();
Found = FindFirst(“*.dat”, FileInfo );
WHILE (Found = 0)
{
NumDateOfMonth = FileGetDateNum(FileInfo);
PRINT ( “Day of the month of file = %d\n”, NumDateOfMonth);
Found = FindNext(FileInfo);
}
IF ( FindClose() < 0 )
PRINT ( “Error in closing find operation\n” );
EndFileOperations();
An example output of this would be “Day of the month of file = 25”.
Version:
SIMPL+ Version 3.00.02 or higher (Pro 2 only)
Control System:
2-Series Only