Crestron SIMPL+ - PauseAllWait Function

Software Crestron SIMPL+
®
260 z SIMPL+
®
Language Reference Guide - DOC. 5797G
PauseAllWait
Name:
PauseAllWait
Syntax:
PauseAllWait();
Description:
Pauses all WAIT events for the current SIMPL+ program. When an event is paused,
the timer for it freezes and may later be resumed, retimed, or cancelled. When a wait
is resumed, it executes the remaining time from when it was paused until the defined
wait time.
Parameters:
None.
Return Value:
None.
Example:
DIGITAL_INPUT Trig, PauseWaits;
PUSH Trig
{
WAIT(1000, FirstWait)
}
PRINT(“Wait 1 Triggered!\n”);
{
WAIT(2000, SecondWait)
}
PRINT(“Wait 2 Triggered!\n”;
}
}
PUSH PauseWaits
{
PauseAllWaits();
}
In this example, when Trig is pushed, a 10-second and 20-second event is scheduled.
When PauseWaits is triggered, any of the running WAIT events will be halted, but
may later be resumed, cancelled, or retimed.
Version:
SIMPL+ Version 1.00