Crestron SIMPL+ - Page 82

Software Crestron SIMPL+
®
72 z SIMPL+
®
Language Reference Guide - DOC. 5797G
E-mail Function Return Error Codes
ERROR CODE # DESCRIPTION
SMTP_OK 0 Success
SMTP ERRORS (NONRECOVERABLE ERRORS)
ERROR CODE # DESCRIPTION
SMTP_ERROR_FATAL -1 Any non-recoverable error from the e-mail
module of the firmware (for example: if
“mailserver”, “from” and “to” are empty).
SMTP_ERROR_ILLEGAL_CMD -2 General internal error.
SMTP_ERROR_CONNECT -3 Failure to connect to the mailserver.
SMTP_ERROR_SEND -4 Internal error while actually sending out e-mail.
SMTP_ERROR_RECV -5 Internal error while actually receiving out e-mail.
SMTP_ERROR_NU_CONNECT -6 Internal error while processing the send.
SMTP_ERROR_NU_BUFFERS -7 Lack of memory buffers while processing send
or receive mail. Internal error.
SMTP_ERROR_AUTHENTICATION -8 Authentication failure.
SMTP_ERROR_AUTH_LOGIN_UNSUPPORTED -9 CLEAR TEXT login scheme is not supported.
SMTP_INV_PARAM -10 Bad parameters to SendMail. Must supply
Server, From, and To.
SMTP_ETHER_NOT_ENABLED -11 Ethernet not enabled. Cannot send mail.
SMTP_NO_SERVER_ADDRESS -12 No DNS servers configured. Cannot resolve
name.
SMTP_SEND_FAILURE -13 SendMail failed.
SMTP FAILURES (RECOVERABLE ERRORS)
ERROR CODE # DESCRIPTION
SMTP_FAILURE_TO_RCPT_COMMAND 3 There was an error sending e-mail to the “to”
recepient.
SMTP_FAILURE_CC_RCPT_COMMAND 4 There was an error sending e-mail to the “CC”
recepient.
SMTP_FAILURE_DATA_COMMAND 5 There was an error sending the message body.