Product Manual — Doc. 8555F TS-70 Series • 119
Enter Setup
Select Enter Setup to force the touch screen to enter its built-in setup interface.
Enter Standby
Select Enter Standby to force the touch screen to enter standby mode.
Save Changes
Select Save Changes to save any changes made to the configuration settings.
Revert
Select Revert to revert the touch screen back to the last saved configuration settings.
Upload User Project
Select Upload User Project to upload a custom user project to the touch screen. A Project Upload
dialog box opens.
Project Upload Dialog Box
NOTE: This selection is available only if the touch screen is running in user project mode.
To upload a custom user project:
1. Select Browse, and then navigate to the project .vtz file on the host computer.
2. Select the project .vtz file, and then select Open.
3. Select Load to load the project .vtz file to the touch screen. The upload progress is shown
in the dialog box.
4. Once the touch screen has completed the project upload, select OK.
Select the x button to close the Project Upload dialog box at any time during the upgrade
process. Selecting the x button before the project file is uploaded to the touch screen cancels the
upload.
To Next Page
Loading...
Need help?
General
