Crestron TS-70 Series User Manual

116 • TS-70 Series Product Manual — Doc. 8555F
Web Configuration
The touch screen may be monitored and configured using the included web configuration
interface. The configuration interface is accessible from a web browser if the touch screen IP
address is known.
The web configuration interface is also accessible through the XiO Cloud® service. For more
information, refer to Connect to XiO Cloud Service (on page156).
To access the configuration interface:
1. Use the Device Discovery tool in Crestron Toolbox™ software to discover the touch screen
and its IP address on the network.
2. Open a web browser.
3. Enter the touch screen IP address into the browser URL field. The configuration interface
is displayed (TS-1070 shown).
NOTE: If authentication is enabled for the touch screen, an administrator username
and password must be entered prior to accessing the web configuration interface. For
more information on configuring authentication settings, refer to Authentication (on
page141).
Web Configuration Interface
The configuration interface provides the following tabs:
l
Status:Used to monitor touch screen status
l
Settings:Used to configure touch screen settings

Crestron TS-70 Series Specifications

General

Brand	Crestron
Model	TS-70 Series
Category	Touch Panel
Language	English