74 • TS-70 Series Product Manual — Doc. 8555F
Create an Admin Account
The first time the web configuration interface is accessed, a page is displayed asking the user to
create an admin account. A similar message is displayed when connecting to the control system
in Crestron Toolbox software if an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the appropriate text fields.
CAUTION:Do not lose the username and password for the admin account, as the
control system must be reset to factory settings to regain access.
2. Select OK to create the admin account. The web configuration interface refreshes to show
the standard login page.
3. Reenter the credentials created in step 1 and select Sign In.
NOTE:The username and password must also be entered when connecting from
CrestronToolbox or XPanel.
Set the Time Zone
The time zone must be set on the touch screen if it will not be paired with a control system
IPtable.
To set the time zone:
1. Access the web configuration interface using either the touch screen IP address.
2. Select the Settings tab.
3. Navigate to System Setup >Time/Date.
4. Select the time zone where the touch screen will be used from the Time Zone drop-down
menu.
5. Select Save Changes on the top right of the screen.
Select an Application
The touch screen ships with various built-in applications. An application may be selected from
the default project that ships with the touch screen.
NOTE:Applications can be selected and configured from the device setup screens or from
the web configuration interface at any time. For more information, refer to Application
Selection (on page154).
To select a touch screen application:
1. Tap Touch Here to Enable a Specific Application on the device splash screen. Refer to the
first image in TS-770-GV and TS-1070-GV Installation (on page70).
To Next Page
Loading...
Need help?
General
