Crestron TS-70 Series User Manual

Product Manual — Doc. 8555F TS-70 Series • 117
l
Security:Used to enable authentication and other security settings
l
802.1x Configuration:Used to configure IEEE 802.1X network authentication for touch
screen security
NOTE: Some device settings may be displayed or hidden depending on the selected
application mode.
If the Crestron room scheduling application is running on the touch screen, the web configuration
utility provides additional configuration options for the room scheduling application. For more
information, refer to the Crestron Room Scheduling Panels Operations Guide.
The Status tab is the default tab that is displayed, as shown in the previous image.
Actions Menu
The configuration interface provides an Actions drop-down menu on the top right of the page.
The Actions menu may be accessed at any time.
Actions Menu
Once any changes have been made to the touch screen configuration, the Actions button
changes to a Save Changes button. SelectSave Changes to save changes to the configuration
settings.
If a restart is required after changes have been saved, a dialog box is displayed asking whether
the restart should be performed. Select Yes to restart the device or No to cancel the restart.
The Actions menu provides the following selections.
Reboot
Select Reboot to restart the touch screen.

Crestron TS-70 Series Specifications

General

Brand	Crestron
Model	TS-70 Series
Category	Touch Panel
Language	English