Crestron TS-70 Series User Manual

Product Manual — Doc. 8555F TS-70 Series • 69
Select an Application
The touch screen ships with various built-in applications. An application may be selected from
the default project that ships with the touch screen.
NOTE:Applications can be selected and configured from the device setup screens or from
the web configuration interface at any time. For more information, refer to Application
Selection (on page154).
To select a touch screen application:
1. Tap Touch Here to Enable a Specific Application on the device splash screen. Refer to the
first image in TS-770 and TS-1070 Installation (on page63).
2. Select the desired touch screen application from the Choose Application Below menu that
is displayed.
3. Select Confirm. The touch screen restarts to display the user interface for the selected
application.
If a custom user project will be used, tap User Project. Custom user projects can be uploaded
using the web configuration interface or Crestron Toolbox software.

Crestron TS-70 Series Specifications

General

Brand	Crestron
Model	TS-70 Series
Category	Touch Panel
Language	English