Crestron TS-70 Series - Page 72

68 • TS-70 Series Product Manual — Doc. 8555F
NOTE:The username and password must also be entered when connecting from
CrestronToolbox or XPanel.
Set the Time Zone
The time zone must be set on the touch screen if it will not be paired with a control system
IPtable.
To set the time zone:
1. Access the web configuration interface using either the touch screen IP address or the XiO
Cloud service.
2. Select the Settings tab.
3. Navigate to System Setup >Time/Date.
4. Select the time zone where the touch screen will be used from the Time Zone drop-down
menu.
5. Select Save Changes on the top right of the screen.