•
certain Wi-Fi networks.
• Wi-Fi Direct: Use the Wi-Fi Direct feature.
• WPS Push Button: Connect to a WPS network via the push button
method.
• WPS Pin Entry: Connect to a WPS network via the phone PIN method.
Using Wi-Fi Direct
Wi-Fi Direct allows Wi-Fi devices to connect to each other without the need for
wireless access points (hotspots).
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
To connect to another device:
1. Press the Home key >
> > Wi-Fi..
2. If Wi-Fi is off, slide the Wi-Fi switch to the On
position.
paT .3
> Advanced > Wi-Fi Direct . Your phone will search for other devices
enabled with Wi-Fi Direct connections.
ecived rehto ehT .ti htiw tcennoc ot secived reeP rednu eman ecived a paT .4
will receive a Wi-Fi Direct connection prompt and need to accept the
request for connection. Both devices may need to enter a common PIN. If
prompted, tap CONNECT.
5. Once connected, the device is displayed as “Connected.”
is off.
Changing the device name
1. Press the Home key >
> > Bluetooth.
2. Slide the Bluetooth switch to the On
position if Bluetooth
3. Tap
> Rename this device.
4. Edit the name and tap RENAME.
wen rof hcraes ot ti rof tiaw ro htiw detcennoc sah enohp eht ecived a paT .3
devices and tap one of them.
To receive data:
When an attempt to transfer data via Wi-Fi Direct is received, you can see a
and select Accept to start receiving the data.
You can access them with the File Manager app.
Connecting to Bluetooth devices
Bluetooth is a short-range wireless communication technology. Phones or
other devices with Bluetooth capabilities can exchange information wirelessly
within a distance of about 30 feet. The Bluetooth devices must be paired
before the communication is performed.
Turning Bluetooth on/off
1. Press the Home key > > > Bluetooth.
2. Slide the Bluetooth switch to the On
or Off position.
When Bluetooth is on, the icon will appear in the Status Bar. Your phone will
be visible to nearby devices while Bluetooth Settings is open.
To send data:
to share.
by yrav yam dohtem ehT .tceriD aiv gnirahs rof noitpo eht tceleS .2
application and data type.
Wi-Fi
34 35
To Next Page
Loading...
