EasyManua.ls Logo

Cricket Wave - Core Phone Functions; Understanding Phone Status and Notifications

Cricket Wave
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
.
Pairing with another Bluetooth device
1. Press the Home key > > > Bluetooth.
2. Slide the Bluetooth switch to the On
position if Bluetooth is off.
Your phone automatically scans for and displays the IDs of all
available Bluetooth devices in range. You could tap > Refresh if
you want to scan again.
3. Tap the device you want to pair with.
Bluetooth passkeys are the same between the two
devices and tap PAIR. Alternately, enter a Bluetooth passkey and tap PAIR
Pairing is successfully completed when the other device accepts the
connection or the same passkey is entered.
Note: The Bluetooth
headsets and hands-free car kits. You can try entering 0000 or 1234
(the most common passkeys), or refer to the documents for that device.
Unpairing from a Bluetooth device
You can make your phone forget its pairing connection with another
Bluetooth device. To connect to the device again, you may need to enter or
eht sserP .1 Home key > > > Bluetooth and make sure Bluetooth is
turned on.
2. Choose one of the following options:
Charge this device: just charge this device
If you are using USB tethering, you must turn that off before you can use a USB
Connecting your phone to a computer via USB
1. Connect your phone to the PC with a USB cable.
eht ediseb pat ,secived deriap fo tsil eht nI .2 Bluetooth device you want
to unpair from.
3. Tap FORGET.
Sending data via Bluetooth
to share.
aiv gnirahs rof noitpo eht tceleS .2 Bluetooth. The method may vary by
application and data type.
a paT .3 Bluetooth device the phone has paired with or wait for it to search
for new devices and tap one of them.
Receiving data via Bluetooth
1. Turn Bluetooth on before trying to receive data via Bluetooth.
Note: If the phone has not been paired with the sending device, you may
need to tap your phone’s device name in the Bluetooth menu in Settings
to keep the phone detectable through Bluetooth.
2. Swipe down on the Status Bar and tap
.
3. Tap ACCEPT to start receiving the data.
the phone storage default. You can access them in the File Manager.
list.
your contact
Connecting to your computer via USB
You can connect your phone to a computer with a USB cable and transfer
in internal storage or on a removable microSD card.
stored
36 37

Table of Contents

Related product manuals